Skip to content

Ground, repaired and tested Serving 58 Tennessee cities Free written estimates

Prep and Repair

Flaked, pitted or crumbling? Rebuilt and ready.

Damaged surfaces, chipped edges and pits are cut back and rebuilt with repair mortar so floors, steps and drives are sound again.

  • Materials: Polymer-modified repair mortars
  • Prep: Cut back to sound concrete
  • Shaping: Edges and steps rebuilt by hand
What might it cost?Try the Floor Cost Calculator
Concrete Spall and Pitting Repair: illustrative concrete coating image for TN Concrete Coating
Patch it smooth.
The overview

What it is, and why it matters.

Spalling happens when the surface layer of concrete flakes off, usually from freeze-thaw, salt, rusting steel or poor finishing. Pitting leaves rough craters. Both make coating difficult and trip hazards worse.

We repair spalls and pits for homes and businesses in Nashville and across Tennessee. Loose concrete is cut back, rebar is treated if exposed, a bonding agent is applied and a polymer-modified repair mortar rebuilds the surface flush. Edges and steps are shaped by hand.

Why owners choose it

Four things done right.

Rebuilt, not just covered

Weak concrete is removed first.

Strong bonding

Primers and bonding agents hold repairs.

Shaped by hand

Steps and edges look original.

Ready for coating

Repairs cure and blend before the finish.

How it goes

From first call to concrete spall and pitting repair.

  1. 01

    Assess the damage

    We identify the cause and the extent.

  2. 02

    Cut back

    Loose concrete is removed.

  3. 03

    Rebuild

    Repair mortar is applied and shaped.

  4. 04

    Cure and finish

    Repairs cure before coating or sealing.

Where we coat

Concrete Spall and Pitting Repair across Tennessee.

We do this work in 58 cities, from Nashville and Franklin to Memphis, Knoxville, Chattanooga and Bristol.

Good questions

Concrete Spall and Pitting Repair: common questions

What causes concrete to spall?

Freeze-thaw cycles, de-icing salts, rusting reinforcement and weak surface concrete are the usual causes.

Can spalled concrete be coated?

After repairs, yes. Coating over unrepaired spalls will fail or reveal the damage.

How do I get a price for concrete spall and pitting repair?

Fill in the form or call or text 615-209-7643. We confirm what is involved and send a written price, and most projects start with a free site visit.

Ready to talk about concrete spall and pitting repair?

A site visit, a moisture test and a written price. A real person calls back, usually the same day.

Free estimate

Let's look at your floor.

Tell us what you want to coat: a garage, a basement, a patio, a pool deck, a shop or a whole building. A real person reads every message and calls back, usually the same day, with straight answers and a written estimate.

  • A site visit first: we measure, test moisture and check the slab for cracks, stains and old coatings
  • Honest advice on the right system, the color and the gloss for the way you use the floor
  • A written price with the prep, the system, the topcoat and the cure plan spelled out
Prefer to talk? Call or text615-209-7643

Your free estimate

We only use your details to respond to your request.