Skip to content

Ground, repaired and tested Serving 58 Tennessee cities Free written estimates

Epoxy and Flake Floors

Peeling, stained or tired? Give it a second life.

Failed, yellowed or worn epoxy is stripped or ground, repaired and recoated so the floor looks new again and stays that way.

  • Diagnosis: Adhesion, moisture and wear check
  • Removal: Grinding or stripping failed coating
  • Repair: Cracks and pits filled and leveled
Which system fits?Try the System Matcher
Epoxy Floor Repair and Recoating: illustrative concrete coating image for TN Concrete Coating
Fix it once, properly.
The overview

What it is, and why it matters.

Epoxy floors fail for a handful of reasons: moisture under the slab, weak prep, hot tire pickup, sunlight yellowing or simple wear. A recoat over a failing coating only repeats the failure, so the first job is to find out why it let go.

We repair and recoat floors across Tennessee, including Nashville garages and shops. We check adhesion and moisture, grind away loose coating, repair the slab and apply a fresh system, often with a more durable topcoat. The result is a floor that looks new and is built to last longer than the first one.

Why owners choose it

Four things done right.

We find the cause

Moisture, prep or product problems are identified before recoating.

Failed coating removed

Loose or soft coating is ground away instead of covered.

Repairs under the new coat

The slab is made sound first.

Upgraded topcoat

A more durable topcoat can prevent the same failure.

How it goes

From first call to epoxy floor repair and recoating.

  1. 01

    Inspect and test

    We check bond, moisture and the condition of the slab.

  2. 02

    Remove and repair

    Failed coating is removed and the slab repaired.

  3. 03

    Recoat

    A new system is applied with the right prep.

  4. 04

    Protect

    A durable topcoat finishes the floor.

Where we coat

Epoxy Floor Repair and Recoating across Tennessee.

We do this work in 58 cities, from Nashville and Franklin to Memphis, Knoxville, Chattanooga and Bristol.

Good questions

Epoxy Floor Repair and Recoating: common questions

Can you coat over my old epoxy?

Sometimes, if it is well bonded and sound. Peeling, soft or contaminated coatings should be removed first.

Why did my epoxy peel?

The most common causes are moisture vapor from the slab, poor surface prep and hot tire pickup. A diagnosis shows which one applies.

How do I get a price for epoxy floor repair and recoating?

Fill in the form or call or text 615-209-7643. We confirm what is involved and send a written price, and most projects start with a free site visit.

Ready to talk about epoxy floor repair and recoating?

A site visit, a moisture test and a written price. A real person calls back, usually the same day.

Free estimate

Let's look at your floor.

Tell us what you want to coat: a garage, a basement, a patio, a pool deck, a shop or a whole building. A real person reads every message and calls back, usually the same day, with straight answers and a written estimate.

  • A site visit first: we measure, test moisture and check the slab for cracks, stains and old coatings
  • Honest advice on the right system, the color and the gloss for the way you use the floor
  • A written price with the prep, the system, the topcoat and the cure plan spelled out
Prefer to talk? Call or text615-209-7643

Your free estimate

We only use your details to respond to your request.