Skip to content

Ground, repaired and tested Serving 58 Tennessee cities Free written estimates

Polishing and Sealing

A natural, stone-like look from the slab itself.

Light honing or deeper grinding exposes fine or coarse aggregate for a matte, natural look with a sealed, easy-care surface.

  • Depth: Cream to full exposed aggregate
  • Sheen: Matte to satin
  • Fill: Pinholes filled before sealing
Which system fits?Try the System Matcher
Honed and Exposed Aggregate Finishes: illustrative concrete coating image for TN Concrete Coating
Stone character, concrete honesty.
The overview

What it is, and why it matters.

Not every concrete floor needs a mirror shine. A honed finish stops short of a high gloss and leaves a soft, matte or satin surface. Grinding deeper exposes the stones in the mix, which gives a terrazzo-like look in some slabs.

We hone and expose aggregate in homes, restaurants and shops across Tennessee, including Nashville interiors. We grind to the depth you want, repair and fill pinholes, densify and seal. The finish is a natural, lower-sheen alternative to polishing that is also friendly to slip resistance.

Why owners choose it

Four things done right.

Natural stone look

Aggregate shows through the surface.

Low glare

Matte finishes soften reflection.

Slip-friendly

Lower sheen supports traction.

Easy to clean

Sealed surfaces mop clean.

How it goes

From first call to honed and exposed aggregate finishes.

  1. 01

    Decide the depth

    We show test patches at several depths.

  2. 02

    Grind and fill

    The slab is ground and pinholes filled.

  3. 03

    Densify

    The surface is hardened.

  4. 04

    Seal

    A sealer protects the finish.

Where we coat

Honed and Exposed Aggregate Finishes across Tennessee.

We do this work in 58 cities, from Nashville and Franklin to Memphis, Knoxville, Chattanooga and Bristol.

Good questions

Honed and Exposed Aggregate Finishes: common questions

Will exposed aggregate look the same everywhere?

No. It depends on the mix and the slab, which is why we show test patches before committing.

Is a honed floor easier to maintain than a polished one?

A lower sheen hides scuffs a bit better, and care is similar.

How do I get a price for honed and exposed aggregate finishes?

Fill in the form or call or text 615-209-7643. We confirm what is involved and send a written price, and most projects start with a free site visit.

Ready to talk about honed and exposed aggregate finishes?

A site visit, a moisture test and a written price. A real person calls back, usually the same day.

Free estimate

Let's look at your floor.

Tell us what you want to coat: a garage, a basement, a patio, a pool deck, a shop or a whole building. A real person reads every message and calls back, usually the same day, with straight answers and a written estimate.

  • A site visit first: we measure, test moisture and check the slab for cracks, stains and old coatings
  • Honest advice on the right system, the color and the gloss for the way you use the floor
  • A written price with the prep, the system, the topcoat and the cure plan spelled out
Prefer to talk? Call or text615-209-7643

Your free estimate

We only use your details to respond to your request.